Taiwan
 
  SATA RAID HBAs
  SAS RAID HBAs
  Mezzanine Board
  SAS Non-RAID HBAs
  External RAID Controllers
   
  Entry Level
  eSATA/USB2.0/iSCSI
/AoE
  Fibre to SAS
  SAS to SAS
   
  Enterprise
  Fibre to SAS
-- iSCSI to SAS
  SAS to SAS
  PCIe2.0 x8
  JBOD/Expander Box
  Desktop RAID Subsystem
  Internal RAID Rack
 
     

Home

> Products > External RAID Controllers
      > eSATA/USB2.0/iSCSI/AoE > Fibre to SAS
      > SAS to SAS > Fiber to SAS
      > iSCSI to SAS > SAS to SAS > PCIe2.0 x8


Relatived Resource  
 
ARC-8x06 DataSheet
   
 

 
  Backplane SolutionCable Solution
   
 

ARC-8306
(1Gb/s iSCSI-to-SAS Redundant Controller)

The 6Gb/s iSCSI to SAS RAID controllers attach directly to SATA/SAS midplanes with 3 x Z-PACK HM-Zd high speed connectors or increase capacity using one additional SFF-8088 external connector. When used with SAS expanders, the controller can provide up to (122) devices through one or more SAS JBODs, making it an ideal solution for enterprise-class storage applications that called for maximum configuration flexibility.

The Fibre/SAS/iSCSI to 6Gb/s SAS RAID subsystem provides three kinds of host interface link to the host board on the server system. This subsystem utilizes the same RAID kernel that has been field-proven in existing internal/external SATA/SAS RAID controller products, allowing to bring stable and reliable SAS RAID external subsystem.

   
  System Architecture
 

800 MHz PowerPC RAID-on-Chip for RAID core and SAS microcode
  Up to 4GB DDR2-800 register SDRAM on one DIMM socket with ECC protection using x8 or x16 devices
  NVRAM for RAID event log & transaction log
  Write-through or write-back cache support
  Redundant flash image for adapter availability
  Real time clock support
  Battery Backup Module ready (Option)
  Management port seamless take-over
   
  RAID Features
  RAID level 0, 1, 1E, 3, 5, 6, 10, 30, 50, 60, Single Disk or JBOD
  Multiple RAID selection
  Online array roaming
  Offline RAID set
  Online RAID level/stripe size migration
  Online volume set growth
  Support global hot spare and dedicated hot spare
  Instant availability and background initialization
  Automatic drive insertion / removal detection and rebuilding
  Greater than 2TB per volume set (64-bit LBA support)
  Greater than 2TB per disk drive
  Disk scrubbing/ array verify scheduling for automatic repair of all configured RAID sets
  Login record in the event log with IP address and service (http, telnet and serial)
  Support intelligent power management to save energy and extend service life
  Support NTP protocol to synchronize RAID controller clock over the on-board LAN port
  Redundant controller operation with active/active and failover/failback function
  Dual-active RAID controller with cache mirroring through dedicated high speed bus
  Automatic synchronization of firmware version in the dual-active mode
  Multi-path & load-balancing support (Microsoft MPIO)
  Max 122 devices
  Max 128 LUNs (volume set) per controller
   
  Drive Interface
  Up to 122 devices using SAS expanders (one external Min SAS 4x connector)
  Up to 6Gb/s per port
   
  Host Interface
  1Gb iSCSI-to-SAS
  Four 1Gb/s iSCSI Channels - 100MB/sec per channel
  iSCSI Hardware iSCSI off-load engine
  iSCSI jumbo frame
  iSCSI Header/Data digest support
  iSCSI MC/S feature support
  iSCSI CHAP authentication
  iSCSI Link Aggregation Control Protocol (LACP)
   
  Monitors/Indicators
  LCD Control Display Panel for setup, alarm mute and configuration
  System Status indication through LCD, LED and alarm buzzer
  Subsystem management ready
   
  RAID Management
  Field-upgradeable firmware in flash ROM
  Firmware-embedded manager via RS-232 port
  Firmware-embedded Web Browser-based RAID manager - Access your RAID subsystem from any standard internet browser via 10/100 Lan port
  Firmware-embedded SMTP manager monitors all system events and user can select either single or multiple user notifications to be sent via “Plain English” e-mails
  Firmware-embedded SNMP agent allows remote to monitor events via 10/100/1000 LAN with no SNMP agent required
  Access terminal menu by telnet via 10/100/1000 LAN port
  API library for customer to write its own monitor utility
  SAP management feature to easily manage multiple RAID units in the network
   
  Operating System
  OS Independent
   

Legal InformationPrivacy PolicySitemap Contact Us │ Copyright © 2005 Areca Technology Corp. All rights reserved.